Table of Contents
Advertisement
High Gain Antenna Kit
PA805 (Figure 12) is a directional antenna
The Shure
®
for increased range and reduced interference. The
"gain" of this antenna enables it to receive signals from
a greater distance than at typical "whip" type antenna.
The antenna allows for increased performance of wireless
microphones with 6 db of gain. The directional antennas
may be located up to 50' (15.2 m) away from the
announcer's rack.
USB Audio Interface
Engineering USB-Pro™ (Figure 13) provides an interface
The Radial
®
from laptop computers to balanced outputs. Other features include:
•
24-bit, 96 kHz quality audio
•
Two balanced XLR outputs (left and right)
•
3.5mm TRS headphone output
•
Ground lift and mono-sum switches
Optional Equipment
Self-Powered Monitor Speaker
The Yamaha MSP3 monitor speaker (Figure 14) features a compact
bass reflex cabinet, with a 3.94" (100 mm) two-way cone speaker
and a 0.87" (22 mm) dome speaker. Other features include:
•
Three inputs: one 1/4" phone, one RCA, one XLR
•
Tone control (High/Low)
Signal Cables
Cable specifications are as follows:
•
30' (9.1 m) XLR cable from rack to fiber box or wall plate (part # 0A-1340-0301)
•
50' (15.2 m) snake harness from rack to remote mixer (part # W-3627434)
•
5' (1.5 m) XLR cable for auxiliary audio input (part # W-1627)
•
15' (4.6 m) XLR cable from announcer's interface to wall plate (part # W-2074)
•
25' (7.6 m) XLR cable for connecting additional wired microphones (part # W-1560)
•
3' (1 m) USB A to B cable between USB audio interface and a computer (part #
W-1635)
SSR-300 Components
7
Figure 12: Directional Antenna
Figure 13: USB
Audio Interface
Figure 14: Self-
Powered Speaker
Advertisement
Table of Contents
