Titan ProPAC-3 Manual page 8

PRESS
On entering the program, the Program Mode screen will appear for four (4) seconds.
TITAN PRO PAC-3
Titan
ProPAC-3
Software Version 3.01
Serial ID 0122435B0000000E
Power On Count 3
Following the four (4) second viewing of the Program Mode screen, the following Menu Selection screen
will appear - ADMINISTRATION SECTION.
TITAN PRO PAC-3
Ch3 Additive Set
Ch3 Customer ID
ADMINISTRATION SECTION
Grand Additive Total
Grand Product Total
Scroll to desired menu selection for Editing. Modify value if necessary, and then save. Minimum and
maximum values for each menu selection will be displayed in the upper left corner of the graphical display.
TITAN PRO PAC-3
Min. 0.0001
Max. 9999.9999
Ch1 Product K-Factor
1.0000
Select
TO ENTER THE PROGRAMMING MODE
BATCH CONTROLLER
Program
Mode
BATCH CONTROLLER
Edit
Exit
BATCH CONTROLLER
Save
Cancel
Digit
Change
8
- Microprocessor Software Version
- Unique Microprocessor Serial Number
- Number of times the Microprocessor has
been turned on
X
If Is pressed again this screen will be
displayed for another 4 seconds
USE
THROUGH MENU SELECTIONS
USE
X
USE
IN EDIT MODE, USE
TO SELECT DIGIT FOR EDITING
USE
DECREMENT SELECTED DIGIT
X
USE
USE
TO SCROLL
TO EDIT SELECTION
TO EXIT PROGRAM
TO INCREMENT OR
TO SAVE EDIT
TO CANCEL EDIT