Batch Controller Programming - Titan ProPAC-3 Manual

CONTRAST ADJUSTMENT
Note: Use the Up/Down arrows
ProPac-3 power-up the display is difficult to read. Hold down until display is clear.
STEP 1
Press the key to ENTER the program. If lock code has been programmed, enter the lock code as
instructed. See following page for menu selections.
STEP 2
Use Up/Down arrows
incrementing/decrementing counters. Each menu will be highlighted during scrolling.
Use Left/Right arrows
STEP 3
Use the key to EDIT/SAVE. Use the
The graphical display screen
displays a sky-blue background
with white alphanumeric
characters
.
Programming instructions and
Min./Max. Values are provided
on the graphical display screen
while in the program EDIT
Section 1

Batch Controller Programming

Version 3.01
to change the graphical display contrast, if on
to scroll through menu selections, changing options, and
to select digit for changing when in Edit mode.
key for EXIT/Cancel.
TITAN PRO PAC-3
Titan
ProPAC-3
Software Version 2.50
Serial ID 0122435B0000000E
Power On Count 3
TITAN PRO PAC-3
Min. 0.0001
Max. 9999.9999
Ch1 Product K-Factor
1.0000
7
BATCH CONTROLLER
Program
Mode
BATCH CONTROLLER
Digit
Change
Select
X
Save
X
Cancel