Table of Contents
Advertisement
TITAN PRO PAC-3
RedDye Load Additive
2.774
RedDye Load Product
4,200
3.4 Multiple Station Injector - Alarm State Operation
As with the single station use of the ProPAC-3, the Alarm State Screen will indicate injector alarms
occurring during the Load State. The Alarm State Screen will alternate (5 second intervals) with the channel
specific Load State Screen until the alarm has been reset.
When the Multiple Station Injector is in the Idle State (no Permissive Input selected) and an alarm is active,
the Alarm Screen will cycle, at 5-second increments, with the various Idle State screens.
BATCH CONTROLLER
100.2
X
Fig. 6
26
Advertisement
Table of Contents
Need help?
Do you have a question about the ProPAC-3 and is the answer not in the manual?
Questions and answers