Advertisement
Dispensing the Disinfectant
1. Dispense the disinfectant from the container as
needed by pressing your elbow against the
operating lever and hold the other hand under the
outlet.
Note:
At the first time operation, press the operating lever
several times to the stop until the disinfectant
dispenser starts dispensing. Hold your hand under
the dispensing head.
Cleaning and Disinfecting of Housing and Dosing Pump
ATTENTION!
For cleaning, never use any scrubbing not acute cleaning agents,
neither cleaning agents that contain chlorine, as they may damage the
surface.
1. Regularly perform disinfecting cleaning by wiping external surfaces of the
disinfectant dispenser.
2. Before each refilling of the disinfectant dispenser thoroughly clean it manually.
Follow the below described steps.
3. Remove the disinfectant container from the housing, completely empty it before
refilling with a disinfectant.
4. Wash the housing, dispensing head, dispensing pump with tube thoroughly from
the inside and the outside under hot running water.
5. Dry and disinfect cleaned surfaces with a disinfectant wipe.
6. If possible, do not touch the tube, otherwise wipe it with a disinfectant wipe
before placing it into the disinfectant container.
850048
Fig. 6
EN
7 / 8
Advertisement
