Troubleshooting - Black+Decker LD12 Manual

8 • ENGLISH
require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
f Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based cleaner.
f Regularly open the chuck and tap it to remove any
dust from the interior.
¡Important! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed in this
manual) should be performed by authorized service centers or other
qualified organizations, always using identical replacement parts.
Unit contains no user service able parts inside.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed
PROBLEM
Unit will not start.
Battery packwill not charge.
Unit shuts off abruptly.
BATTERIES
f Run the battery down completely, then remove it from
f NiCd, NiMH and Li-Ion batteries are recyclable.

TROUBLESHOOTING

POSSIBLE CAUSE
Battery pack not installed properly
Battery pack not charged.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot
or too cold.
Battery pack has reached its
maximumthermal limit.
Out of charge. (To maximize the life
of the battery pack it is designed to
shut off abruptly when the charge is
depleted.)
of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment:
the tool.
Take them to any authorized repair agent or a local
recycling station.
POSSIBLE SOLUTION
Check battery pack installation.
Check battery pack charging
requirements.
Insert battery pack into charger until
green LED appears
Plug charger into aworking outlet.
Refer to "Important Charging Notes"
formore details.
Move charger and battery pack to
a surrounding air temperature of
above 40 oF 4,5°C) or below 105 oF
(+40,5°C).
Allow battery pack to cool down.
Place on charger and allow to charge.