Honeywell Small SATCOM Operation, Installation, And Maintenance Manual page 68

Table of Contents

Advertisement

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Table 8. Fault Possible Causes (Cont)
PROBLEM
POSSIBLE CAUSE
Low data rate from
Satellite partial blockage
terminal
Connected to satellite with low
elevation
Loose connectors
Damaged RF cable
Component failure
Low rate streaming connection Disconnect and reconnect to
Network contention
Poor latency
Background connection
UAV's GPS fails to
Interference from Satcom
lock
emissions
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
SOLUTION
Ensure antenna is outside with
an unobstructed view of the sky
Disconnect and reconnect
Correctly torque RF connectors
Replace RF cable
Contact Support
background
Wait for the network should adapt
Switch to a streaming connection
Increase isolation between
Satcom antenna and GPS
antennas
Page 43
18 Feb 2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

90410350

Table of Contents