SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Table 7. Ground Level Thermal Capabilities
Mounting
Mounting Description
Standard
Indoor Unit is mounted or bolted
directly to insulating surface. For
instance, onto a composite surface.
On Controlled Plate
Indoor Unit is mounted or bolted
directly to a thermally conductive
surface. For instance, actively
controlled cooling plate.
On Standoff
Indoor Unit is mounted or bolted with
a gap to an insulating surface. For
instance, vibration mounts. The gap
allows airflow underneath the Indoor
Unit.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
Minimum Air Flow Required to
Operate at 55°C (131°F)
123 CFM
No Airflo
27.43 CFM
Page 38
18 Feb 2021