Advertisement
A35US
Narrow pitch connectors
PRODUCT TYPES
Mated height
Number of pins
0.6mm
Notes: 1. Order unit:
For volume production: 1-inner carton (1-reel) units
For samples, please contact our sales office.
2. Please contact us for connectors having a number of pins other than those listed above.
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
characteristics
Breakdown voltage
Insulation resistance
Contact resistance
Composite insertion force
Composite removal force
Mechanical
Contact holding force
characteristics
(Socket signal terminal,
Header power terminal)
Ambient temperature
Storage temperature
Thermal shock resistance
(header and socket mated)
Environmental
characteristics
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H
S resistance
2
(header and socket mated)
Insertion and removal life
Soldering heat resistance
Unit weight
2. Material and surface treatment
Part name
Material
Molded
LCP resin
portion
(UL94V-0)
Contact and
Copper alloy
Post
with power terminal (0.35mm pitch)
Socket
10
AXG7100J7
12
AXG7120J7
16
AXG7160J7
20
AXG7200J7
24
AXG7240J7
30
AXG7300J7
34
AXG7340J7
40
AXG7400J7
50
AXG7500J7
60
AXG7600J7
Specifications
3.0A/pin contact (power terminal)
0.30A/pin contact (signal terminal): Max. 5 A at total
pin contacts
60V AC/DC
150V AC for 1 min.
Min. 1,000MΩ (initial)
Max. 30mΩ (power terminal)
Max. 90mΩ (signal terminal)
1.300N/pin contacts × pin contacts
0.165N/pin contacts × pin contacts
Min. 0.20N/pin contacts
–55°C to +85°C
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 30mΩ (power terminal)
max. 90mΩ (signal terminal)
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 30mΩ (power terminal)
max. 90mΩ (signal terminal)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 30mΩ (power terminal)
max. 90mΩ (signal terminal)
48 hours,
contact resistance max. 30mΩ (power terminal)
max. 90mΩ (signal terminal)
Mechanical life: 30 times
Contact resistance max. 30mΩ (power terminal)
max. 90mΩ (signal terminal)
Composite removal
force 0.165N/pin contacts × pin contacts
The initial specification must be satisfied electrically
and mechanically
60 pin contacts: Socket 0.02g Header 0.01g
Contact portion: Base: Ni plating, Surface: Au plating
Terminal portion: Base: Ni plating, Surface: Au plating (except the terminal tips)
The terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).
Power terminals: Sockets: Base: Ni plating, Surface: Au plating (except the terminal tips)
Headers: Base: Ni plating, Surface: Au plating
Part number
Header
AXG8100J4
AXG8120J4
AXG8160J4
AXG8200J4
AXG8240J4
AXG8300J4
AXG8340J4
AXG8400J4
AXG8500J4
AXG8600J4
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Using 250V DC megger (applied for 1 min.)
Based on the contact resistance measurement method
specified by JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures. No dew condensation.
No freezing at low temperatures. No dew condensation.
Conformed to MIL-STD-202F, method 107G
Order Temperature (°C)
1
2
3
4
Conformed to IEC60068-2-78
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Conformed to IEC60068-2-11
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200 times/
hours
Infrared reflow soldering: Peak temperature: 260°C or less
Soldering iron: 300°C within 5 sec.
Surface treatment
—
–2–
Packing
Inner carton (1-reel)
Outer carton
10,000 pieces
20,000 pieces
Conditions
Time (minutes)
0
–55
30
−3
Max. 5
+3
85
30
0
Max. 5
0
–55
−3
(on the surface of the PC board
around the connector terminals)
350°C within 3 sec.
ACCTB78E 201510-T
Advertisement
