Operation - Koch PxtFX Operating Manual

6
Slot Micro SD card
BOOT button
RESET button
O
PERATION



Fig. 16: Buttons and operating displays
1 Micro SD card slot
2 BOOT button (bootloader)
3 RESET button
With a micro SD card, a firmware update can be performed via the slot.
If the BOOT button is pressed for longer than 5 seconds, an update on the inserted
micro SD card is written to the flash memory. Then the PxtFX device is started with
the new software parameters (
When the RESET button is pressed, a hardware reset is performed.
4 Operating displays L1 and L2
5 Operating displays L3 and L4

Page 28, "Installing the firmware update").
Operating manual PxtFX active energy management device

6 Operation



25
V1.1DE/EN