4 Transport / Storage / Installation
4.4
4.5
Basic information
Distances
Installation location
14
Operating manual PxtFX active energy management device
V1.1DE/EN
Unpacking the PxtFX active energy management device
Carefully remove the PxtFX active energy management device from its packaging.
Check that nothing is missing and that it is undamaged.
Dispose of the packaging in accordance with local regulations for cardboard boxes
and recyclable materials.
Installing the PxtFX active energy management device
Risk of damage!
Assembly upside down is prohibited!
• The PxtFX active energy management device is intended to be installed in an
electrical cabinet.
• The PxtFX active energy management device must be protected against
penetration of foreign bodies in the cabinet.
• The unit is installed directly on a mounting surface in the control cabinet.
During installation, the following distance to other modules must be maintained:
• Above and below: at least 100 mm.
• Sufficient fresh air supply from below must be available.
• Air circulation in the free space must be ensured.
• PxtFX devices with energy module(s) may only be mounted hanging upright and
are marked with a "TOP" sticker.
Fig. 6: "TOP" sticker