Advertisement
If communicating at the password change time boundary, the session can run for an addition 4
hours without changing the password.
Data-Connect (internal app).........
Connecting with device browser........
Controller Function Code:
WiFi User Interface:
1.1 Wireless menu in ALT. Mode
Below are the necessary (limited set of) parameters that are needed for wireless configuration
and status checks, accessible via the 7-seg LCD display.
More comprehensive wireless configuration and status are available via the embedded http
portal.
All the below parameters are available in ALT. Mode under the "nEt" menu.
Need to determine how to explain many of
these options to the user
TYPE
FUNCTION
MAIN MENU
DEFAULT
MAIN MENU DISPLAY
- Add instruction to connect app to controller
- Add instruction to open browser and open webpage
Display, Select
WIRELESS ACCESS
Wireless Enable/ Disable, WiFi Role, WiFi
Access Point Status, WiFi Client Status (WiFi
Role = Station), Token (Derived Key), WiFi
Password
Wireless Enable/ Disable
For Wireless Enable/ Disable: Left Display: "
EnbL", Right Display: " on", " OFF"
For WiFi Role: Left Display: " roLE", Right
Display: " AP", " STA", " dUAL"
For WiFi Access Point Status: Left Display:
"APStA", Right Display: " OFF", " InIt", "
IdLE", " Err", " Conn"
For WiFi Client Status: Left Display: " CStA",
Right Display: " OFF", " Conn", " InIt",
"IPCHk", " IdLE", " SrCH", " Err"
For Token (Derived Key): Left Display: "
toK", Right Display: " EntR"
When Enter is pressed: Left Display: <blank>,
Right Display: 4 digit numeric text (Phase 1),
" COnF"
2
Advertisement
