Honda TRX250TE 2019 Owner's Manual page 128

Engine Oil
3. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 180).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
1. Reinstall the oil drain bolt with a new sealing washer, and tighten
it to the specified torque:
25 N·m (2.5 kgf·m , 18 lbf·ft)
2. Fill the crankcase with the recommended grade oil
approximately:
1.5 ℓ (1.6 US qt , 1.3 Imp qt)
3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 – 5 minutes.
5. Stop the engine and check the oil level. Make sure the oil is
between the upper and lower level marks on the oil fill cap/
dipstick. If necessary, add more oil but do not overfill.
6. Check that there are no oil leaks.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
118 Servicing Your Honda