Reverse Inhibitor System - Honda TRX250TE 2019 Owner's Manual

Reverse Inhibitor System

Reverse Inhibitor System Adjustment
Refer to Safety Precautions on page 97.
LEFT HANDLEBAR
(1)
2 – 4 mm
(0.1 – 0.2 in)
(1) dust cover
(2) reverse assist lever
(3) rubber sleeve
(4) lock nut
1. Turn over the dust cover (1).
2. Check the reverse assist lever (2) freeplay, measured at the
reverse assist lever end near the cable:
2 – 4 mm (0.1 – 0.2 in)
3. To adjust, slide the rubber sleeve (3), loosen the lock nut (4) and
turn the adjusting nut (5) to obtain the correct freeplay.
After adjustment, tighten the lock nut securely.
4. Return the dust cover and rubber sleeve.
Other Checks
Check the reverse assist lever and cable for loose connections or
other damage. If the cable is worn or kinked, have it replaced by
your dealer.
130 Servicing Your Honda
(2)
(5) adjusting nut
(A) decrease freeplay
(B) increase freeplay
(4)
(B)
(A)
(5)
(3)