Troubleshooting - Electrolux EDH903BEWA User Manual

13. TROUBLESHOOTING

Problem
You cannot activate the appliance.
The programme does not start.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfacto‐
ry drying result.
The App cannot connect to the dryer.
1)
Possible solution
Make sure that the mains plug is connec‐
ted to the mains socket.
Check fuse in fuse box (domestic installa‐
tion).
Press Start/Pause.
Make sure that the appliance door is
closed.
Make sure that the installation of the filter
is correct.
Make sure that the laundry is not caught
between the appliance door and the rub‐
ber seal.
Make sure that the water container is
empty. Press Start/Pause to start the pro‐
gramme again.
Load is too small, increase the load or
use the Time Drying programme.
Make sure that the weight of the laundry
is suitable for the duration of the pro‐
gramme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry
in the washing machine again.
Ensure that the room temperature is
higher than +5°C and lower than +35°C.
Optimal room temperature is 19°C to
24°C.
Set the Time Drying or the Extra Dry pro‐
2)
gramme.
Check if your smart device is connected
to the wireless network.
Check your home network and router.
Restart the router.
Contact your wireless service provider if
there are problems with the wireless net‐
work.
The dryer, the smart device, or both,
need to be configured again.
ENGLISH 21