Advertisement
Put the weighing pan onto the weighing platform,
Place the power adapter outside the explosive zone (i.e. in a safe area),
Plug the cable (~20 m) to the power outlet DC IN on scale's indicator
KEX-TM.
Before the first start up, make sure, there is no explosion danger –
there is no explosive atmosphere. If there is any sign that the scale is
not working properly, unplug it from mains, secure it and notify KERN
service.
Connect the supplier to mains 230V AC.
In case of prolonged not using of the scale – unplug it from mains.
Press ON/OFF to switch on the device – keep pressing it for about 1 sec.
Wait for the test completion, then you will see zero indication and pictograms:
IEX-BASV-e-1711
1. Power socket
2. Power adaptor connector
3. Grounding lamp
4. Load cell conductor
5. Data plate of power connector
9
Advertisement
