Computer Interface With Watchgas Suite; Connecting And Configuring - WatchGas NEO User Manual

D e t e c t i o n D e t e c t i o n
8. Computer interface met WatchGas Suite
The WatchGas Suite software can be used to:
• Log real-time data.
• Download logged data.
• Upload configuration parameters to the instrument
• Upgrade the instrument firmware.
The WatchGas Suite can be downloaded from

8.1 CONNECTING AND CONFIGURING

1. Turn on the instrument and press Up from basic User Mode to go into PC comm.
2. Connect the WatchGas M-011-3003-000 USB cable to the PC and with the Micro-USB end to the
instrument.
3. Start WatchGas Suite on your PC and click the "Search" button to find the instrument.
4. Find the instrument in the left bar Device Connected list. Click on the S/N to get the configuration file
from the instrument.
5. Edit the configuration parameters as desired and click "Write" to upload the configuration to the
instrument.
6. "Read" allows downloading the current configuration file from the instrument.
7. "Save" allows storing the current configuration file to the PC.
8. "Load" allows calling up a stored configuration file from the PC to WatchGas Suite.
9. To update the instrument firmware, select "Firmware Upgrade". The firmware must first be
downloaded to the PC from the WatchGas website www.WatchGas.eu.
Notes
• Any USB A to Micro B USB cable will work for charging.
• For PC communication with WatchGas Suite, WatchGas USB cable P/N M-011-3003-W00 is required.
NEO Photoionization Detector
https://www.watchgas.eu/downloads.html
WATCHGAS SUITE CONFIGURATION SCREEN
26
User Manual
.