Set Datalog Interval; Mnt (Monitor) Setup; Date And Time; Display - WatchGas NEO User Manual

D e t e c t i o n D e t e c t i o n
1. From the Datalog submenu, press
Ent Esc
2. Press to clear the datalog. Display shows "Clear Datalog?".
Ent Esc
3. Press to cancel.
4. Press to clear the datalog.
OK
Ent Esc
Display shows "Datalog Cleared!" and moves to the next submenu.

7.4.2 SET DATALOG INTERVAL

Interval is shown in seconds.
The value you enter must be between 1 and 3600 seconds.
Notes
• At a 1-second interval, the instrument can store the values for 6 days of continuous
measuring.
• At a 60-second interval, the instrument can store the values for a year of continuous
measuring.
• When the datalog memory is full, the instrument overwrites the oldest data in the
memory.

7.5 MNT (MONITOR) SETUP

In the Monitor Setup menu, you can check and modify several other settings,
including date and time, pump parameters, display parameters.

7.5.1 DATE AND TIME

Date is expressed as Month/Day/Year.
Time is expressed as Hours/Minutes/Seconds in a 24-hour clock format.

7.5.2 DISPLAY

You can change the display's contrast and backlight settings.
NEO Photoionization Detector
Ent Esc
OK
Ent Esc
OK
OK
OK
or to select "Clear Datalog"
22
User Manual