Retrieve Datalog - WatchGas NEO User Manual

User Manual

8.2 RETRIEVE DATALOG

1. Select "Get Log" to download the datalog from the instrument to the PC.
Note
• This process can take several minutes because datalogging is always on and large files are created when the
instrument is used for prolonged periods.
• A new Single Datalog file is created each time the instrument is turned on or the configuration is changed.
The datalog files appear under the "Datalog" tab on the top of the screen. Below is sample screen of
datalog information listing sample point time and instantaneous reading.
To export a single event:
2. Select the event you want to download from the middle pane.
3. Right-click the right pane.
4. Click "Export Single Datalog" and follow the screen instructions.
To export all events:
2. Right-click the right pane.
3. Click "Export Whole Datalog" and follow the screen instructions.
NEO Photoionization Detector
WATCHGAS SUITE DATALOG SCREEN
27
D e t e c t i o n D e t e c t i o n
www.watchgas.eu