Garmin Speed Sensor 2 Quick Start Manual page 7

EN
4 Rotate the crank arm to check for
clearance.
The sensor and bands should not contact
any part of your bike or shoe.
NOTE: The LED flashes green for five
seconds to indicate activity after two
revolutions.
5 Take a 15 minute test ride and inspect the
sensor and bands to ensure there is no
evidence of damage.
Pairing the Sensors with Your
Garmin Device
The first time you connect a wireless sensor
to your device using ANT+ or Bluetooth
technology, you must pair the device and
sensor. After they are paired, the device
connects to the sensor automatically when
you start an activity and the sensor is active
and within range.
6
®
Spd/Cad Sensor 2