Other Precautions - SMART Board 685ix Manual

ii | I M P O R T A N T I N F O R M A T I O N
CAUTIONS
• If you need to lean your interactive whiteboard against a wall before you
mount it, make sure that it remains in an upright position, resting on its pen
tray brackets, which are designed to sustain your interactive whiteboard's
weight.
• Do not rest your interactive whiteboard on its side or on the top of its frame.
• Do not add any extra weight or excessive pressure to a wall-mounted
interactive whiteboard or its pen tray. SMART designed the brackets
to support only the weight of your interactive whiteboard during normal use.
• For operating safety and to avoid damage to your interactive whiteboard,
connect its USB connector only to a computer that has a USB compliant
interface and that bears the USB logo. In addition, the USB source computer
must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA
and/or UL mark(s) for CSA/UL 60950.

Other precautions

To ensure operating safety and to avoid product damage, observe the following
precautions.
• Don't set up and use your interactive whiteboard in an area with excessive levels
of dust, humidity or smoke.
• If your SMART product requires replacement parts, make sure that the service
technician uses replacement parts specified by SMART Technologies or parts
with the same characteristics as the original.
• Be aware that security cable locks aren't designed to be a solid protection
measure because the lock can be torn out. However, potential thieves might be
reluctant to try to sell a product with a broken security cable lock hole, which
would readily identify it as a stolen item.