Table of Contents
Advertisement
8
www.electrolux.com
3.1 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
For minimal distances for fitting check
the table.
Minimum distances
Dimension
A
B
C
3.2 Technical data
Voltage
Frequency
Appliance class
Dimension
Height
Width
Depth
B
A
mm
400
650
150
220 - 240 V
50 - 60 Hz
1
mm
858
600
600
3.3 Levelling of the appliance
Use small feet on the bottom of
C
appliance to set the appliance top
surface level with other surfaces.
3.4 Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
You must install the anti-tilt protection. If
you do not install it, the appliance can tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
Make sure that the surface
behind the appliance is
smooth.
Advertisement
Table of Contents
