Indicator Elements - IBA ibaPADU-4-AI-U Manual

7.2

Indicator elements

Operating state
LED
L1: (green)
L2: (yellow)
L3: (white)
L4: (red)
Status of analog inputs
LED per channel
L26 ... L29
12
Manual
Status Description
off no power
blinking slowly ready for operation
blinking fast Firmware update active
on device is booting
on TCP/IP telegrams detected
off No 32Mbit Flex signal detected
blinking (rotary 32Mbit signal detected, but it is not a valid 32Mbit Flex
switch S1 ≠ 0) signal
on 32Mbit Flex signal detected
off device functioning properly
blinking failure, internal applications do not run
on device is defect, contact the iba support
Status Description
off voltage < ±1% of the selected input range
green voltage ±1% ... ±90% of the selected input range
yellow voltage ±90% ... ±100% of the selected input range
red voltage > ±100% of the selected input range
Issue 1.1
(approx. values)
ibaPADU-4-AI-U