How To Enable Read-Only Mode; How To Enable Read/Write Mode - Kingston Technology DataTraveler 2000 User Manual

6. How to enable Read-Only Mode

The DT2000 has a read-only mode that restricts write access to the drive. This is done by performing
the following steps.
Instructions
1. Unlock DT2000 with User PIN
2. Enable Options by pressing the KEY button 3
times (triple-click)
3. Within 10 seconds begin to Press number 7
(pqrs) followed by the number 6 (mno) button (76)
4. Press KEY button once
Once activated, access is limited to Read-Only until write protect is disabled.
Note: We have applied a naming convention to make it easy for the User to remember the
keystrokes for each optional setting. In the table above we have used numbers that represent
the 'first letters' of the optional feature name. For example, Read-Only = 7 (pqrs) 6 (mno).
7. How to enable Read / Write Mode
Restricted write protect (Read-Only) access can be turned off with access restored to Read/Write.
This is done by performing the following Steps.
Instructions
1. Unlock DT2000 with User PIN
2. Enable Options by pressing the KEY button 3 times
(triple-click)
3. Within 10 seconds enter the number 7 (pqrs)
followed by the number 9 (wxyz) button (79)
4. Press KEY button once
Once activated, access is restored to the default Read/Write state.
Document No. 480ADT2000.A00
LED LED Status
Red solid LED changes to
indicating successful User PIN entry
Green and
new instructions in OPTIONS Mode.
Green and
Blue LED quickly fades out to a solid
when DT2000 is inserted into a USB port the
Green LED blinks every two seconds indicating
the drive is in Read-Only Mode
LED LED Status
Red solid LED changes to
indicating successful User PIN entry
Green and
new instructions in OPTIONS Mode.
Green and
Blue LED quickly fades out to a solid
when DT2000 is inserted into a USB port the
Green LED blinks every two seconds indicating
the drive is in Read/Write Mode
DT2000
Green solid LED
Blue LED's blink together awaiting
Blue LED's continue to blink together
Green
Blue LEDs blinking together awaiting
Blue LEDs continue to blink together
Page 8 of 17
Green -
solid LED
Green -