Emerson Micro Motion TA Series Installation Manual page 14

Wiring
May 2021
3. Match the wires color for color. For wiring at the transmitter or remote core
4. Tighten the screws to hold the wires in place.
5. Ensure integrity of gaskets, then tightly close and seal the junction box cover and all
6. Refer to the transmitter installation manual for signal and power wiring
14
Terminal block number
2
3
4
5
6
7
8
9
shield
processor, refer to the transmitter documentation.
housing covers.
instructions.
Wire color
Gray
Green
White
Orange
Yellow
Purple
Red
Brown
Installation Manual
MMI-20040393
Micro Motion TA Series