Important User Information - DeWalt Graco PowerFill 3.5 Standard 26B417 Operation, Parts

Table of Contents

Advertisement

Important User Information

Important User Information
Before using your pump read this Owners Manual for complete instructions on proper use and
safety warnings.
Congratulations! You have purchased a high-quality pump made by Graco Inc. This pump is
designed to provide superior performance with water-based and oil-based (mineral spirit-type)
coatings. This user information is intended to help you understand the types of materials that
can be used with your pump.
Please read the information on the material container label to determine if it can be used with
your pump. Ask for a Safety Data Sheet (SDS) from your supplier. The container label and SDS
will explain the contents of the material and the specific precautions related to it.
Paints, coatings and clean-up materials generally fit into one of the following 3 basic
categories:
WATER-BASED: The container label should indicate that the material can be
cleaned up with soap and water. Your pump is compatible with this type of
material. Your pump is NOT compatible with harsh cleaners such as chlorine
bleach.
OIL-BASED: The container label should indicate that the material is
COMBUSTIBILE and can be cleaned up with mineral spirits or non-flammable
paint thinner. The SDS must indicate that the flash point of the material is above
100°F (38°C). Your pump is compatible with this type of material. Use oil-based
material outdoors or in a well-ventilated indoor area with a flow of fresh air. See
the safety warnings in this manual.
FLAMMABLE: This type of material contains flammable solvents such as xylene,
toluene, naphtha, MEK, lacquer thinner, acetone, denatured alcohol, and
turpentine. The container label should indicate that this material is
FLAMMABLE. This type of material is NOT compatible with your pump
and CANNOT be used.
4
Thank You for Your Purchase!
3A8110C

Advertisement

Table of Contents
loading

Table of Contents