Cleaning - DeWalt Graco PowerFill 3.5 Standard 26B417 Operation, Parts

Cleaning

NOTE: Attach optional cleaning kit (P/N
18D167) and flush pump with water or
compatible cleaning agent to remove any
material or residue prior to removing any
parts.
1. Remove Power Head, see Power Head
Removal, page 25.
Pump Disassembly
2. Remove filter by pinching tabs on filter
and pulling. Rotate inlet housing and pull
to remove housing. Clean inlet assembly
in a bucket of water.
3A8110C
NOTE: If inlet housing is stuck, use a
screwdriver or rod for leverage to assist in
unscrewing the housing.
3. Lower the bucket stabilizer bracket.
Cleaning
21