Table of Contents
Advertisement
Troubleshooting
Testing the Switch Functionality
Follow the steps below to test your switch
functionality.
To Open Unit - All Units
1.
Remove battery, see Battery
Installation and Removal, page 15.
2.
Perform pressure relief procedure, see
Pressure Relief Procedure, page 17.
3.
Turn unit on its side and remove ten
screws on clamshell.
4.
Pull clamshell open and remove switch
from slot in the clamshell. Pull switch free
by disconnecting the connector on the
end of the ribbon.
5.
Once open, follow testing procedure on
the following page.
30
3A8110C
Advertisement
Table of Contents
