Setup
Foot Bracket and Bucket Stabilizer
1.
Attach sliding bracket to foot stand with
provided thumb screw.
2.
Using a 1/2 in. (or 13 mm) wrench,
assemble 5/16 - 18 flange bolts,
assemble foot bracket in desired
orientation and torque to 18 ft.-lbs.
10
Power Head
1.
If necessary, pull piston upwards so
slider will contact piston head.
2.
Place slider on top of piston head.
3.
Align piston head by slowly pressing
piston downward with the Power Head
until pins on Power Head rest atop the
pump frame.
3A8110C