Table of Contents
Advertisement
Operation
Pressure Relief Procedure
To help prevent serious injury from
pressurized fluid or splashed fluid, follow
the Pressure Relief Procedure before
pump is cleaned, and before equipment is
serviced.
In normal use, the PowerFill automatically
relives pressure when the pump is switched
off. If outlet tube becomes plugged pressure
may be trapped in the pump. Follow the steps
below to relieve trapped pressure.
3A8110C
1.
Remove battery from pump, see Battery
Installation and Removal, page 15.
2.
Slowly remove flange bolts shown below
until pressure is relieved.
Operation
17
Advertisement
Table of Contents
