Table of Contents
Advertisement
Press F1 to order to modify the
measuring voltage.
Use buttons
and
to set the
measuring voltage and press
ENTER.
Press START In order for the test to
commence measurement.
Read out the result.
Current electrode resistance
Voltage electrode resistance
Additional uncertainty caused by the
resistance of the electrodes
Displayed, when δ>30%
By pressing the F4 button you can display GPS coordinates.
The result is displayed for 20 s. It
may be displayed again when
ENTER is pressed.
MRU-200 ● MRU-200-GPS – USER MANUAL
19
Advertisement
Table of Contents
Need help?
Do you have a question about the MRU-200 and is the answer not in the manual?