Table of Contents
Advertisement
If the calibration is successful, you will see the following screen.
The meter has determined the correction factor for connected clamp. The factor is saved in the
memory also when the power supply of the meter is off until the following successful calibration of the
clamp has been performed.
10
Connect flexible clamps to ERP-1 adapter.
Wrap the clamps around the wire referred to in sec.
Use FLEX and TURNS buttons on ERP-1 adapter to select the clamps
and number of wraps, according to the actual situation around the wire
referred to in sec.
MRU-200 ● MRU-200-GPS – USER MANUAL
.
Press START button on MRU meter.
(up to 4 times).
Advertisement
Table of Contents
Need help?
Do you have a question about the MRU-200 and is the answer not in the manual?
Questions and answers