Hardware Contents; Preparation - Dyna-Glo DGC313CNCP Manual

Hardware Contents

AA
20X
M6x16
Bolt

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 35 minutes
Some parts may contain sharp edges. Wear protective gloves if necessary. Read and follow all safety
statements, warnings, assembly instructions and use and care instructions before attempting to
assemble and use.
Tools Required for Assembly (not included): Phillips screwdriver
BB
4X
M10 Nut
EE
2X
M10 - M6
Wrench
CAUTiON
CC
4X
M10 Washer
6
DD
2X
M6 Washer
FF
4X
M6 Washer