D-Link DGS-3630 Series Hardware Installation Manual page 57

DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
Feature Description

DEM-302S-BXD (1000BASE-BX-D, single-mode, 2 km, TX: 1550 nm /
RX: 1310 nm)

DEM-302S-BXU (1000BASE-BX-U, single-mode, 2 km, TX: 1310 nm /
RX: 1550 nm)

DEM-330T (1000BASE-BX-D, single-mode, 10 km, TX: 1550 nm / RX:
1310 nm)

DEM-330R (1000BASE-BX-U, single-mode, 10 km, TX: 1310 nm / RX:
1550 nm)

DEM-331T (1000BASE-BX-D, single-mode, 20 km, TX: 1550 nm / RX:
1310 nm)

DEM-331R (1000BASE-BX-U, single-mode, 20km, TX: 1310 nm / RX:
1550 nm)
SFP+ Transceivers Supported:

DEM-431XT (10GBASE-SR, multi-mode, 10 km, without DDM)

DEM-431XT-DD (10GBASE-SR, multi-mode, 10 km, without DDM)

DEM-432XT (10GBASE-LR, single-mode, 10 km, without DDM)

DEM-432XT-DD (10GBASE-LR, single-mode, 10 km, with DDM)

DEM-433XT (10GBASE-ER, single-mode, 40 km, without DDM)

DEM-433XT-DD (10GBASE-ER, single-mode, 40 km, with DDM)

DEM-434XT (10GBASE-ZR, single-mode, 80 km, without DDM)
WDM (BiDi) SFP+ Transceivers Supported:

DEM-436XT-BXD (10GBASE-LR, single-mode, 20 km, TX: 1330 nm /
RX: 1270 nm, without DDM)

DEM-436XT-BXU (10GBASE-LR, single-mode, 20 km, TX: 1270 nm /
RX: 1310 nm, without DDM)
SFP+ Direct Attached Cables (DAC) Supported:

DEM-CB100S (10G SFP+, 1 m) for stacking or uplinking

DEM-CB300S (10G SFP+, 3 m) for stacking or uplinking

DEM-CB700S (10G SFP+, 7 m) for stacking or uplinking
57