Page 3
MANUAL LEKKER BIKES / Amsterdam GT MANUAL LEKKER BIKES / Amsterdam GT combination, tricks and available components. For this reason, our manual is only applicable to your new LEKKER bicycle and its assembly, alongside any important notes, warnings and maintenance guides. Assembly & Maintenance Guide...
Page 4
Index Getting started Fitting the saddle and handlebars Fitting the pedals Aligning the brakes Battery set-up Display settings Finishing touches Safety and warranty Assembly & Maintenance Guide Amsterdam GT...
So, without further ado, unbox your LEKKER bike and feast your eyes on your newest sidekick. Once you’- ve removed the packaging, make sure you have your trustly toolkit to hand, as shown in the illustration on the next page.
Page 7
To do this, simply loosen the bolt at the top of your handlebar stem using a 5mm allen key. Assembly & Maintenance Guide Amsterdam GT...
Page 8
Tip: Should you wish to adjust the angles of your grips, brakes and shifter, you can do so with a simple turn of allen key 3 or 4. However, this should be cor- rectly set already. Assembly & Maintenance Guide Amsterdam GT...
LEFT pedal: this is the pedal that has indented hori- is not covered under warranty. zontal lines on the small part between the pedal and thread. Assembly & Maintenance Guide Amsterdam GT...
5mm allen key bolts (found on the top of the caliper), so that you can gently move the caliper horizontally, allowing the disc rotor to move freely between the brake pads. Assembly & Maintenance Guide Amsterdam GT...
12 hour cycles, for its first three charges. Once you’ve finished inserting the battery, it’s time to turn the bike on! Assembly & Maintenance Guide Amsterdam GT...
2 seconds. This will turn on the screen. Finally, to turn on your front light, press and hold the + button for 2 seconds. Assembly & Maintenance Guide Amsterdam GT...
They each come with their own instructions and also have their own mounting points. Now, you’re good to go. Enjoy your ride, the Amster- dam way! Assembly & Maintenance Guide Amsterdam GT...
Do not make any changes to your electric system or of a LEKKER product. If you want to use the warran- fit any other products to it, aimed at increasing the ty, please ensure you have your receipt and go to the power output from your eBike.