Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lekker Jordaan
Summary of Contents for Lekker Jordaan
- Page 1 Jordaan 3-Speed Womens...
- Page 2 Assembly & Maintenance Guide Jordaan 3-Speed...
-
Page 3: Welcome To Lekker
MANUAL LEKKER BIKES / Amsterdam GT MANUAL LEKKER BIKES / Amsterdam GT combination, tricks and available components. For this reason, our manual is only applicable to your new LEKKER bicycle and its assembly, alongside any important notes, warnings and maintenance guides. Assembly & Maintenance Guide... - Page 4 Index Getting started Fitting the front wheel and fender Aligning the brakes Fitting the saddle and handlebars Fitting the pedals Finishing touches Safety and warranty Assembly & Maintenance Guide Jordaan 3-Speed...
-
Page 5: Getting Started
So, without further ado, unbox your LEKKER bike and feast your eyes on your newest sidekick. Once you’- ve removed the packaging, make sure you have your trustly toolkit to hand, as shown in the illustration on the next page. - Page 6 Assembly & Maintenance Guide Jordaan 3-Speed...
- Page 7 Step 3: Putting the wheel in place Referring to step 3 in the illustration, put the wheel in place and tighten the wheel nut using the 15mm spanner Now, on to the brakes. Assembly & Maintenance Guide Jordaan 3-Speed...
-
Page 8: Aligning The Brakes
5mm allen key bolts (found on the top of the caliper), so that you can gently move the caliper horizontally, allowing the disc rotor to move freely between the brake pads. Assembly & Maintenance Guide Jordaan 3-Speed... - Page 9 Step 1: Now, using a 6mm allen key, loosen the bolt located at the top of the handlebar stem, then insert it into the frame. Once inserted, centre the handlebar and stem and tighten it. Assembly & Maintenance Guide Jordaan 3-Speed...
- Page 10 Tip: Should you wish to adjust the angles of your grips, brakes and shifter, you can do so with a simple turn of allen key 3 or 4. Assembly & Maintenance Guide Jordaan 3-Speed...
-
Page 11: Fitting The Pedals
LEFT pedal: this is the pedal that has indented hori- dal to the wrong side can damage the crank arm and zontal lines on the small part between the pedal and is not covered under warranty. thread. Assembly & Maintenance Guide Jordaan 3-Speed... -
Page 12: Finishing Touches
Using the nut and bolt provided, tighten the light Now, you’re good to go. Enjoy your ride, the onto the fixture. Amsterdam way! Assembly & Maintenance Guide Jordaan 3-Speed... -
Page 13: Safety And Warranty
(including when sold to another consumer) and can only be used by the original buyer of a LEKKER product. If you want to use the warran- ty, please ensure you have your receipt and go to the original shop in which you made your purchase. - Page 14 Assembly & Jordaan 3-Speed Womens Maintenance Guide lekkerbikes.com Assembly & Maintenance Guide...