Table of Contents
Advertisement
7. Go to the "General" panel by clicking the General tab in the Settings
window. Specify the settings for your requirements there.
a)
If necessary, specify the image
settings for the front or back
side of documents separately by
using the Sides of Material control
when Scan Source is set as "ADF
(Duplex)".
b)
Select the image type in the
Document Type as your input
image type.
–
Select Photo to scan color prints.
–
Select Text to scan text.
c)
If necessary, check "Double
Feed", then select a suitable paper
thickness for the ultrasonic double-
feed detection in the Paper Type
options menu to prevent multiple
pages from being fed together
while papers are fed through the
ADF.
d)
If necessary, check "Remove Blank Page" and "Remove Punch Hole" to
enhance the quality of the scanned images.
8. If necessary, go to the "Image Process" panel by clicking the Image Process
tab in the Settings window. Use the image correction tools presented there
to enhance the image quality according to your specific requirements.
9. Click the OK button to close the Scan Setup interface and return to the Main
interface of ScanWizard DI.
10. In the Main interface, click the File Format menu button to select a file
format for the scanned images.
11. In the Main interface, click the File Name menu button to specify a file
naming method for the scanned images.
12. In the Main interface, select and click the Normal Scan button to start
scanning.
When done, the scanned images will be automatically saved into the folder
defined in the File Location menu box. At the same time, the scanned
images will be displayed in thumbnail sizes in the Thumbnail View window
and labeled with the file name and file format specified earlier.
13. Click the Open Folder button to locate the scanned images if you want to
view.
ArtixScan DI 5240/5250/5260 User's Manual
27
Advertisement
Table of Contents
