Menu #2 - Advanced Features; Menu #3 - Remote Start Options - Clarion SR1000 Installation Manual

menu #2 - advanced features

FEATURE NUMBER
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
2-9
2-10
2-11

menu #3 - remote start options

FEATURE
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
ONE-CHIRP SETTING (DEFAULT)
Siren output constant
30 second siren duration*
False Alarm Prevention Circuitry ON
Progressive door trigger
Disarm from Override, 1 pulse
Door sensor bypass chirp ON
Ignition controlled domelight ON
Single unlock pulse
Factory disarm with Channel Two ON
Channel Four validity
Channel 5 Validity
ONE-CHIRP SETTING (DEFAULT)
Engine checking ON
Engine checking TACH
Run time: 12 minutes*
Parking lights flashing
Crank time: 0.6 seconds
Voltage check - high
Short Run/Turbo–1 min.
Activation pulse count–1
2 nd Ignition/Acc output: ignition
Acc state during wait to start: OFF
2 nd status output: Normal
Anti grind: ON
TWO-CHIRP SETTING
Siren output pulsed
60 second siren duration*
False Alarm Prevention Circuitry OFF
Instant door trigger
Disarm from Override, 2-5 pulses
Door sensor bypass chirp OFF
Ignition controlled domelight OFF
Double unlock pulse
Factory disarm with Channel Two OFF
Channel Four: latched/latched, reset
with ignition/30-sec. timed/60-sec.
timed/90-sec. timed
Channel Five: latched/latched, reset
with ignition/30-sec. timed
/60-sec. timed/90-sec. timed
TWO-CHIRP SETTING
Engine checking OFF
Engine checking VOLTAGE
Run time: 24 or 60 minutes*
Parking lights constant
0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0,
4.0 sec.
Voltage check - low
3, 5, 10 min.
Activation pulse count: 2
Accessory
ON
Rear defogger: latch 10 min./pulse
Anti grind: OFF