Clarion SR1000 Installation Manual page 38

The module programming routine may be locked if previously programmed using the Pro
Security Programmer. If the siren generates one long chirp when attempting to program the
unit, the module programming routine is locked and must be unlocked using the Pro Security
Programmer before proceeding.
To program the features using the override switch:
1. Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. Key. Turn the ignition on and then back off.
3. Select Menu. Press and hold the override switch. When the LED flashes once and
the siren chirps Menu One has been selected. Continue to hold the switch until the LED
flashes twice and the siren chirps twice Menu Two has now been selected. Release the
switch after the Menu choice has been selected.
4. Choose. Within 10 seconds, press and release the override switch the number of
times corresponding to the feature number you want to program and then press and
hold the switch. (See Feature Menus.)
After a second, the LED will flash to indicate which feature you have accessed. For
example, in Menu Two, groups of eight flashes would indicate access to the activa-
tion pulse setting (Feature 2-8). The siren will also chirp eight times (if connected).
5. Transmit. The remote is used to select the desired setting. Pressing
change the feature to the LED ON setting (or will flash once for features with more
than 2 settings). The siren will chirp once (if connected). Pressing
setting to the LED OFF setting (or will flash two or more times for features with more
than 2 settings).
6. Release. The override switch can now be released.
You can advance from feature to feature by pressing and releasing the override switch the number
of times necessary to get from the feature you just programmed to the feature you wish to access.
For example, in Menu One, if you just programmed Feature 1-2 and you next want to program
Feature 1-3 to off, release the override switch. Press and release it once to advance from Feature 1-
2 to Feature 1-3. Then press it once more and hold it. The LED will flash in groups of 3 and the siren
will chirp 3 times (if connected) to confirm that you have accessed Feature 1-3.
will
will change the