To exit the learn routine:
One long chirp indicates that Learn Routine has been exited. Learn Routine will be exited if any of the
following occurs:
Ignition is turned off.
Door is closed.
Override switch is pressed too many times.
More than 15 seconds elapse between steps.
remote configurations
The remotes can be programmed with the standard or single button arm/disarm configurations by
using the Auto Learn functions in the Remote Coding section.
standard configuration
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes.
A standard configuration remote allows arming, disarming, and panic mode activation with separate
buttons. When programmed for standard configuration, the remote buttons are assigned to the fol-
lowing functions:
operates Arm only
operates Disarm only
operates Channel 2 and Silent Arm/Disarm
operates Panic
and
The standard configuration also allows the user to utilize Remote Sensor Bypass, a feature that cannot
be accessed from a single button arm/disarm configuration remote.
single button arm/disarm configuration
When programmed for single button arm/disarm configuration, the remote buttons are assigned to the
following functions:
operates Arm/Disarm/Panic
operates Channel 2 and Silent Arm/Disarm
and
32
operate
Channel 3
operate
Channel 3