Type H Door Lock System Wiring Diagram; Peripheral Plug-In Harnesses; Led, 2-Pin White Plug - Clarion S400 Install Manual

type H door lock system wiring diagram:

peripheral plug-in harnesses

LED, 2-pin WHITE plug

The LED operates at (+) 2 volt DC and plugs into the two-pin WHITE port. Make sure the LED wires are
not shorted to ground as the LED will be damaged. Multiple LED's can be used, but they must be wired
in series. The LED fits into a 9/32-inch mounting hole. Be sure to check for clearance prior to drilling
the mounting hole.
N N O O T T E E : : Never use a BLUE LED in combination with a RED LED.
21