Table of Contents
Advertisement
the sensor may be detecting the door opening. Reducing the sensitivity or relocating the sensor
can often solve this problem. If the LED indicates that the door caused the trigger, you may have
programmed the progressive door trigger off. (See Feature 2-4 in the Feature Descriptions section
of this guide.)
The Override switch doesn't work.
Is it plugged into the correct socket? Check the module programming for the programmed
Override pulse count.
Status LED doesn't work.
Make sure that it is plugged in. (See Plug-In Harnesses section of this guide.) Is the LED plugged
into the correct socket?
36
Advertisement
Table of Contents
