Remote Transmitters; Using The Remote Transmitters; Tranmitter Operating Modes; Ungo Standard Mode - Clarion Ungo MS850 Installation Manual

Remote Transmitters

Remote Transmitter Layout
Button 1
Button 2
Each system comes with 2 Remote Transmitters, pre-programmed to operate in the Ungo
Standard Mode and will Arm and Disarm the system with chirp confirmation using Button 1 .
Transmitter Operating Modes
The MS850 can be configured to work with the remote transmitters in one of three ways, Ungo
Standard Mode (default), Convenience Mode, or Driver Door Priority Mode. To select or change
the transmitter operating mode, see Programming .

Ungo Standard Mode

Button 1 Arms and Disarms the system. This button will also lock and unlock the doors when
the system is in Valet mode.
Button 2 controls the system's Auxiliary Function.
When Buttons 1 and 2 are pressed together , the systems Chirp confirmation setting will be
reversed.
If the system was programmed to arm the system with chirp, Pressing Buttons 1 and 2 together will arm the
system without chirp.
If the system was programmed to arm the system without chirp, pressing Buttons 1 and 2 together will arm the
system with chirp.
Page 10 - MS850 Installation Manual
BUTTON 1
BUTTON 2
LED
ARM / DISARM
F1