Installation - Tripp Lite B002-DP1A2-N4 Owner's Manual

Installation

5. Connect a wired USB keyboard and mouse to the console USB keyboard
Installation Installation Installation and mouse ports of the KVM switch.
Note: Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
5. Connect a wired USB keyboard and mouse to the console USB keyboard
5. Connect a wired USB keyboard and mouse to the console USB keyboard 5. Connect a wired USB keyboard and mouse to the console USB keyboard 5. Connect a wired USB keyboard and mouse to the console USB keyboard
6. Connect a set of speakers to the console audio output port of the KVM
and mouse ports of the KVM switch. and mouse ports of the KVM switch. and mouse ports of the KVM switch.
and mouse ports of the KVM Switch.
Switch using a 3.5 mm stereo audio cable.
Note: Keyboards and mice with internal USB hub or composite device functions Note: Keyboards and mice with internal USB hub or composite device functions Note: Keyboards and mice with internal USB hub or composite device functions
Note: Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported. Note: Microphones or headsets with microphones are not supported. are not supported. Wireless keyboards and mice are not supported. are not supported. Wireless keyboards and mice are not supported.
are not supported. Wireless keyboards and mice are not supported.
6. Connect a set of speakers to the console audio output port of the KVM 6. Connect a set of speakers to the console audio output port of the KVM 7. For models with CAC support, connect a CAC reader to the console CAC 6. Connect a set of speakers to the console audio output port of the KVM
6. Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable. port of the KVM switch. Switch using a 3.5 mm stereo audio cable. Switch using a 3.5 mm stereo audio cable.
Switch using a 3.5 mm stereo audio cable.
Note: Microphones or headsets with microphones are not supported. Note: Microphones or headsets with microphones are not supported. Note: CAC readers with external power sources are not supported. Note: Microphones or headsets with microphones are not supported.
Note: Microphones or headsets with microphones are not supported.
7. For models with CAC support, connect a CAC reader to the console CAC 7. For models with CAC support, connect a CAC reader to the console CAC 8. Power on the KVM by connecting the included external power supply 7. For models with CAC support, connect a CAC reader to the console CAC
7. Power on the KVM by connecting the included external power supply
port of the KVM switch. and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit port of the KVM switch. port of the KVM switch.
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
Note: CAC readers with external power sources are not supported. Note: CAC readers with external power sources are not supported. Note: CAC readers with external power sources are not supported.
(PDU), or Uninterruptible Power Supply (UPS).
9. Power on all connected computers and monitor. The Front Panel LEDs
8. Power on the KVM by connecting the included external power supply 8. Power on the KVM by connecting the included external power supply 8. Power on the KVM by connecting the included external power supply
8. Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
will begin to flash.
(PDU), or Uninterruptible Power Supply (UPS). (PDU), or Uninterruptible Power Supply (UPS). (PDU), or Uninterruptible Power Supply (UPS).
Note: The computer connected to port 1 will always be selected by default after
Note: The computer connected to port 1 will always be selected by default after
power up.
9. Power on all connected computers and monitor. The Front Panel LEDs 9. Power on all connected computers and monitor. The Front Panel LEDs 9. Power on all connected computers and monitor. The Front Panel LEDs
power up.
10. To switch among the connected computers, simply push the desired
will begin to flash. will begin to flash. will begin to flash.
9. To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
Note: The computer connected to port 1 will always be selected by default after Note: The computer connected to port 1 will always be selected by default after Note: The computer connected to port 1 will always be selected by default after
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
power up. power up. power up.
the LED of that port will turn on.
10. To switch among the connected computers, simply push the desired 10. To switch among the connected computers, simply push the desired 10. To switch among the connected computers, simply push the desired
Note: The KVM will terminate an open session upon switching to a different
input button on the front-panel of the KVM. If an input port is selected, input button on the front-panel of the KVM. If an input port is selected, input button on the front-panel of the KVM. If an input port is selected,
computer.
the LED of that port will turn on. the LED of that port will turn on. the LED of that port will turn on.
9
9 9 9
8/10/2018 2:43:5
8/10/2018 2:43:5 8/10/2018 2:43:5 8/10/2018 2:43:5