Advertisement
NAVIGATING THE SOLO
QUICK REFERENCE GUIDE
NOTE: This guide is meant to be used only as a brief, general
reference. For complete operating instructions, always refer
to the Operator's Manual.
Turning Concentrator On/Off
NOTE: For this procedure, refer to FIGURE 1.1.
1. To turn the SOLO
On/Off button
and the unit beeps.
2. To turn the SOLO
On/Off button
NOTE: GREEN light will flash and you will hear the machine stop
running.
On/Off
Button
Return/Highlight
Button
FIGURE 1.1 Turning Concentrator On/Off
Menu Screens Navigation
NOTE: For this procedure, refer to FIGURE 1.1.
1. After turning on unit, press and hold the Return/Highlight
Button
menu screens.
NOTE: Screens will continue scrolling until the Return/Highlight
Button is released.
Normal Operating/Standby Screen
The Normal Operating/Standby screen shows either battery
strength gauge, fan operating, external power on and battery
charging icons, when applicable, or the current/last mode of
operation and output flow level selected.
SOLO
™ Quick Reference Guide
2
concentrator on, press and hold the
2
until the three warning lights display
concentrator off, press and hold the
2
.
to scroll through the three SOLO
™ LCD SCREEN
2
1
concentrator
2
Part No 1163220
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Invacare SOLO 2
Summary of Contents for Invacare SOLO 2
- Page 1 NAVIGATING THE SOLO ™ LCD SCREEN QUICK REFERENCE GUIDE NOTE: This guide is meant to be used only as a brief, general reference. For complete operating instructions, always refer to the Operator’s Manual. Turning Concentrator On/Off NOTE: For this procedure, refer to FIGURE 1.1. 1. To turn the SOLO concentrator on, press and hold the On/Off button until the three warning lights display and the unit beeps. 2. To turn the SOLO concentrator off, press and hold the On/Off button NOTE: GREEN light will flash and you will hear the machine stop running. On/Off Button Return/Highlight Button FIGURE 1.1 Turning Concentrator On/Off Menu Screens Navigation NOTE: For this procedure, refer to FIGURE 1.1.
- Page 2 LCD Adjust Screen The LCD Adjust screen allows user to change the brightness and contrast of the screen (FIGURE 1.2). Up/Increase Button Return/Highlight Down/Decrease Button Button FIGURE 1.2 LCD Adjust Screen LCD Adjust Screen Navigation NOTE: For this procedure, refer to FIGURE 1.2. 1. Perform one of the following, while the LCD Adjust screen is displayed: A. Tap the Return/Highlight Button to move the black highlight bar from left to right, or right to left. B. Tap the Up/Increase Button or the Down/Decrease Button while the black highlight bar is on the “LEFT SIDE” of the screen to move the highlight bar up or down. C. Tap the Up/Increase Button or Down/Decrease Button while the highlight bar is on the “RIGHT SIDE” of the screen to change the value of the item ...
- Page 3 2. To save changes made on the LCD Adjust screen: A. Press and hold the Return/Highlight Button until a different screen appears. Mode & Flow Adjust Screen The Mode & Flow Adjust screen allows user to change the current mode of operation and output flow (FIGURE 1.3). Up/Increase Button Down/Decrease Return/Highlight Button Button FIGURE 1.3 LCD Adjust Screen Changing Mode NOTE: For this procedure, refer to FIGURE 1.3. 1. Press and hold the Return/Highlight Button until the Mode & Flow Adjust screen appears. NOTE: Verify that “MODE” is highlighted by the black highlight bar before proceeding. 2. Tap the Return/Highlight Button to move the highlight bar to the right. The current mode (“CONTINUOUS” or “PULSE”) should now be highlighted. A. If “CONTINUOUS” is highlighted, press the Down/Decrease Button ...
- Page 4 Invacare Corporation www.invacare.com All rights reserved. Trademarks are One Invacare Way identified by ™ and ®. All trademarks are Elyria, Ohio USA owned by or licensed to Invacare 44036-2125 Corporation or its subsidiaries unless 800-333-6900 otherwise noted. Technical Services © 2009 Invacare Corporation...
Need help?
Do you have a question about the SOLO 2 and is the answer not in the manual?
Questions and answers