Changing Procedure - Alfa Romeo STELVIO 2021 Owner's Manual

Changing Procedure

1. Park the vehicle on a firm, level surface.
Avoid ice or slippery areas.
WARNING!
Do not attempt to change a tire on the side
of the vehicle close to moving traffic. Pull
far enough off the road to avoid being hit
when operating the jack or changing the
wheel.
2. Turn on the Hazard Warning Flashers.
3. Apply the electric park brake.
4. Place the gear selector into PARK (P).
5. Place the ignition in the OFF mode.
6. Block both the front and rear of the wheel
diagonally opposite of the jacking position.
For example, if changing the right front
tire, block the left rear wheel.
Wheels Blocked
196
7. Open the liftgate and lift up the load floor
using the handle.
8. Take the warning triangle and position it at
a suitable distance from the vehicle to
warn oncoming vehicles.
9. Unscrew the locking plate and take out the
compact spare tire
compressor.
www.inhauto.com
Compact Spare Tire — If Equipped
1 — Locking Plate
10. Remove the damaged wheel by using the
wheel wrench to loosen the bolts by one
turn.
11. Position the jack under the vehicle, near
the wheel to be changed, taking care not
to damage the plastic body panel.
12. Lift the extension lever on the wrench.
and the air
2 — Extension Lever
3 — Wrench Head
4 — Jack
5 — Lifting Block
Jacking Location