Table of Contents
Advertisement
retractor and then letting the webbing retract
back into the retractor. If it is locked, the ALR
will make a clicking noise while the webbing is
pulled back into the retractor.
Refer to the "Automatic Locking Mode"
description on
Ú page 168 for additional
information on ALR.
Please see the table below and the following
sections for more information.
What is the weight limit (child's weight +
weight of the child restraint) for using the
Tether Anchor with the seat belt to attach
a forward facing child restraint?
Can the rear-facing child restraint touch
the back of the front passenger seat?
Can the rear head restraints be removed?
Can the buckle stalk be twisted to tighten
the seat belt against the belt path of the
child restraint?
186
Lap/Shoulder Belt Systems For Installing
Child Restraints In This Vehicle
Automatic Locking Retractor (ALR) Locations
ALR — Switchable Automatic Locking Retrac-
tor (ALR)
Top Tether Anchorage Symbol
www.inhauto.com
Frequently Asked Questions About Installing Child Restraints With Seat Belts
Weight limit of the Child Restraint
Always use the tether anchor when using the
seat belt to install a forward facing child
restraint, up to the recommended weight limit
of the child restraint.
Contact between the front passenger seat
Yes
and the child restraint is allowed, if the child
restraint manufacturer also allows contact.
All head restraints can be removed if they
interfere with the installation of the child
Yes
restraint. See Ú page 35 for further
information.
Do not twist the buckle stalk in a seating
No
position with an ALR retractor.
Advertisement
Table of Contents
