Adjusting The Fader; Switching The Clock Display; Setting The Clock - Clarion M255 Product Manual

Basic Operations
Adjusting the balance
1. Press the [ A-M ] button and select "BAL".
2. Turning the [ ROTARY ] knob clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗ The factory default setting is "0". (Adjustment
range: L13 to R13)

Adjusting the fader

1. Press the [ A-M ] button and select "FAD".
2. Turning the [ ROTARY ] knob clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers. The line-level outputs
are used in conjunction with the rear speaker
settings.
∗ The factory default setting is "0". (Adjustment
range: F12 to R12)
Turning the MAGNA BASS EX on/off
The MAGNA BASS EX emphasizes deep bass
to provide you with a dynamic sound.
∗ The factory default setting is off.
Press and hold the [ A-M ] button for 2 seconds or
longer to turn the MAGNA BASS EX and "M-B EX"
in the display lights on or off.
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion. You can turn on or off this function.
If the button operation is performed with the screen
saver function on, the operation display corre-
sponding to the button operation is shown for
about 30 seconds and the display returns to the
screen saver display.
∗ The factory default setting is off.
Press the [ SS ] button while keeping the [ BND ]
button pressed, to turn the screen saver function
on or off.

Switching the clock display

Press and hold the [ BND ] button, and then press
the [ DISP ] button to switch between the opera-
tion mode and the clock display.

Setting the clock

1. Press and hold the [ BND ] button, and then
press the [ DISP ] button to display the clock dis-
play.
2. Press and hold the [ BND ] button, and then
press the [ DISP ] button for 2 seconds or longer.
3. Press the [ ] or [ ] button to toggle HOUR
and MINUTE selection. Then turn the [ RO-
TARY ] knob clockwise to increase hour /
minute or counterclockwise to decrease hour /
minute.
4. Press the [ BND ] button, then clock is set.
Note:
• If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
• If you remove the vehicle's battery for a check or
repair, the clock will reset, so you must set it again.
9
M255