Storing The Dcp In The Dcp Case; Removing The Dcp; Attaching The Dcp - Clarion M255 Product Manual

6. DCP ( Detachable Control Panel )
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP ( Detachable Control Panel ) case to
prevent scratches.
We recommend taking the DCP with you when
leaving the car.

Removing the DCP

1. Press the [ FNC ] button for 1 second or longer
to switch off the power.
2. Press in the [ RELEASE ] button.
∗ The DCP is unlocked
3. Remove the DCP.

Attaching the DCP

1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP to attach into
the main unit.

Storing the DCP in the DCP case

Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP case.
( Ensure the DCP is in the correct orientation. )
CAUTION
!
• The DCP can be damaged by impact. After
removing it, be careful not to drop or sub-
ject the unit to strong shocks.
• When the Release button is pressed and the
DCP is unlocked, the car's vibrations may
cause it to fall. To prevent damage to the
DCP, always store it in its case after detach-
ing it. ( See figure above. )
• The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
7
M255