Hd Radio Operations - Clarion VX401 Owner's Manual & Installation Manual

HD Radio Operations

This function is available when an HD Radio tuner is connected.
This unit can control the following HD Radio tuner:
• HD Radio Tuner (THD400)
Note:
• Be sure to disconnect power before connecting/disconnecting the HD Radio tuner.
• Not all areas offer HD Radio broadcasts
• HD Radio stations may not always broadcast subchannels
• Volume levels of HD Radio stations may vary. Increase the volume gradually from the minimal
setting after the channel is selected. Be sure to lower the volume setting before switching to
another mode or channel.
Additional information about HD Radio technology can be found at www.hdradio.com
Listening to HD Radio Broadcasts
1. Touch the Tuner key on the Main menu
display. The tuner mode screen is displayed.
. Touch the [BAND] key or press the [Band]
button on remote control to select the radio
band. Each time the key is touched, the
radio reception band changes between FM
and AM.
1
11
10
9
1 - Band key
 - Signal Strength
 - Eject key
4 - Main Menu key
5 - HD Multicast key
6 - Tune Up key
Seek Tuning
1. Touch the [BAND] key to select the radio
band (FM or AM).
. Touch the [ ] or [
Seek
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Manual Tuning
1. Touch the [BAND] key to select the radio
band (FM or AM).
  4 5
7 - Tune Down key
8 - Tag key
9 - List key
10 - Seek Down key
11 - Seek Up key
] key to
Seek
] key, the station is
Seek
] key, the station is
Seek
. Touch the [
M-Seek
seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Recalling a preset station
There are  ways to recall the preset station.
• Using the remote control:
1. Touch the [BAND] button to select the
6
desire band (FM or AM) on the remote
control.
7
. Touch the preset number (1 to 16) on
numeric pad.
• Using the tuner unit:
1. Touch the [BAND] key to select the
8
desire band (FM or AM) on the tuner.
. Touch the [List] key to display the Preset
List screen.
. Touch the preset station (1 to 16) on tuner
display.
4. Touch [ ] or [
up or down the preset list.
5. Touch the [PS] button to begin scanning
the preset stations.
Manual memory
1. Touch the desired Band key to select the
band you wish to store in.
. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
. Touch and hold the desired Preset key you
wish to store the current station for more than
 seconds.
] or [ ] key to manually
M-Seek
] key, the station is
M-Seek
] key, the station is
M-Seek
] to select next station
VX401/VZ401
7